Analysis of ink-jet printing post-production process

Post production is an indispensable process in the printing industry, to the success of, quality assurance plays a very important role. A quick, delicate post-production, works of not only the icing on the cake, can also create greater economic benefits for the company and corporate reputation. Post production concept widely, almost all design work is in post-production. Such as: output, cutting, laminating, mounting, splicing, and so on. Below, description of the work done in the late.

Output

Graphic design work is completed the first output. In this process, the output image will be sure to merge all layers (layer), the General need to save the file as. tif or. jpg format, if the image is made with Apple computer, the file must have extension. Points set for image files, remained in 100dpi and output accuracy can be achieved, if the output of the image surface is large, points can be appropriately reduced. This process has several problems: first printing is different from printing, inkjet color print gorgeous, pretty much. Spray drawing mode must be set to RGB rather than CMYK mode. Printing image surfaces tend to be large, some imperceptible flaw in print after the amplifier output will become very obvious and exaggerated, and that this in turn pass the sample to be discovered, inkjet, like the completed must be amplified to 100% check again. For writing a lot of pictures, but also to proofread carefully. And because there was no color in printing output, take in the color cast on experience, this is where the purpose of sample.